Name: International Collaboration on Advanced Neutron Sources (ICANS XXIII)
Start: 2019-10-13T17:30:00-04:00
End: 2019-10-18T19:30:00-04:00
Location: Chattanooga Convention Center

International Collaboration on Advanced Neutron Sources (ICANS XXIII)

from Sunday 13 October 2019 (17:30) to Friday 18 October 2019 (19:30)

Monday 7 October 2019
Tuesday 8 October 2019
Wednesday 9 October 2019
Thursday 10 October 2019
Friday 11 October 2019
Saturday 12 October 2019
Sunday 13 October 2019

17:30 Registration
Registration
17:30 - 19:30
Room: Lobby

18:00 Welcome Reception
Welcome Reception
18:00 - 20:00
Room: Lobby

Monday 14 October 2019
08:00 Working Breakfast and Welcome
Working Breakfast and Welcome
08:00 - 09:00
Room: Ballroom F
Contributions

08:00 Discussion planning with session chairs; Poster presenters hang posters

08:45 Welcome - Kenneth Herwig (ORNL)
Registration
Registration
08:00 - 10:30
Room: Lobby
09:00 Monday Plenary
Monday Plenary
09:00 - 10:30
Room: Ballroom F
Contributions

09:00 Update from the ORNL Neutron Scattering Facilites - Hans M. Christen (Neutron Scattering Division, Oak Ridge National Laboratory)

09:30 LANSCE: A Center for Nuclear and Materials Research - Gus Sinnis (Los Alamos National Laboratory)

10:00 Machine Learning and Big Scientific Data: AI for Science - Tony Hey (Rutherford Appleton Laboratory STFC)
10:30 Coffee
Coffee
10:30 - 10:45
Room: Ballroom F
10:45 Novel Spectrometers
Novel Spectrometers
10:45 - 13:00
Room: Meeting Room 3
Contributions

10:45 CAMEA — A novel multiplexing analyzer for neutron spectroscopy - Christof Niedermayer (Laboratory for Neutron Scattering and Imaging, Paul Scherrer Institut)

11:35 CHESS: A look into the next generation of neutron instruments - Gabriele Sala (Neutron Scattering, Spectroscopy Division)

12:00 A direct-geometry spectrometer at the China Spallation Neutron Source - Xin Tong (China spallation neutron source)

12:30 Spectrometers Breakout DIscussion - Georg Ehlers (Oak Ridge National Laboratory)
Data management
Data management
10:45 - 13:00
Room: Meeting Room 7
Contributions

10:45 IDAaaS: ISIS Data Analysis As A Service - The Story So Far - Russell Ewings (ISIS)

11:15 The European Open Science Cloud: Promoting Open Science, FAIRness and Accelerating Scientific Discovery - Lamar Moore (UKRI - Science and Technology Facilities Council)

11:40 Scientific software developments at the European Spallation Source. - Jonathan Taylor (European Spallation Source ERIC)

12:05 Data Management Discussion - Toshiya Otomo (JPARC)
Target Lifetime
Target Lifetime
10:45 - 13:00
Room: Meeting Room 6
Contributions

10:45 Spallation Neutron Source (SNS) 2 MW Target Life Analysis - Justin Mach (ORNL)

11:10 Measurements of the Effectiveness of Gas Injection on Reliability of Liquid Metal Spallation Targets - Drew Winder (ORNL)

11:35 Investigations on the Premature Failure of SINQ Target #11 and its Countermeasures - Bertrand Blau (Paul Scherrer Institut)

12:00 Scope and Status of Materials Research for Source Technologies at ESS - Yong Joong Lee (European Spallation Source ERIC)

12:25 Lifetime Criteria of Core Components in ESS Target Environment during Beam Energy Ramp Up - Yong Joong Lee (European Spallation Source ERIC)

12:50 Target Discussion
13:00 Working Lunch: Cross Breakout Discussions
Working Lunch: Cross Breakout Discussions
13:00 - 14:00
Room: Ballroom F
14:00 Novel Instrumentation II
Novel Instrumentation II
14:00 - 16:30
Room: Meeting Room 3
Contributions

14:00 HRPD-X; a proposed upgrade to the ISIS High-Resolution Powder Diffractometer - Dominic Fortes (ISIS Neutron & Muon Spallation Source)

14:30 Breaking the mould: monochromatic diffraction at a pulsed spallation neutron source - Paul Henry (ISIS Neutron & Muon Source)

14:55 DEMAND (HB-3A), a Dimensional Extreme Magnetic Neutron Diffractometer at the High Flux Isotope Reactor - Huibo Cao (Oak Ridge National Laboratory)

15:20 Characterization of shielding materials for neutron scattering instrumentation - Matthew Stone (Oak Ridge National Laboratory)

15:45 Technique Development Beamlines at the High Flux Isotope Reactor - Lowell Crow (Neutron Technologies Division, ORNL)

16:10 Novel Instrumentation Discussion - Christian Rüegg (Paul Scherrer Institute)
Large Scale Structures Analysis
Large Scale Structures Analysis
14:00 - 16:30
Room: Meeting Room 7
Contributions

14:00 SASVIEW – DATA ANALYSIS FOR SMALL ANGLE SCATTERING - Andrew Jackson (European Spallation Source)

14:30 Challenges for Grazing Incidence Neutron Scattering at Pulsed Sources: Beyond basic experiments and data analysis - Valeria Lauter (Neutron scattering Division, Oak Ridge National Laboratory)

14:55 The small angle neutron scattering extension in MCNPX - Kyle Grammer (ORNL)

15:20 Large Scale Structures Analysis Discussion
Source Development
Source Development
14:00 - 16:30
Room: Meeting Room 6
Contributions

14:00 The SNS Moderator Test Station - Erik Iverson (ORNL)

14:25 Slowing Down of 14 MeV fusion neutrons and possible applications - Antonino Pietropaolo (ENEA Department of Fusion and Technologies for Nuclear Safety and Security)

14:50 SEEMS – An SNS-Based Dual Purpose Target Station for Electronics Single Event Effects Testing and Muon Spectroscopy - Bernie Riemer (SNS / ORNL)

15:15 Proposal for a Fusion Prototypic Neutron Source at LANSCE - Eric Pitcher (Los alamos National Laboratory)

15:40 The concept of an inverse geometry for a high power UCN source - Guenter Muhrer (European Spallation Source ERIC)

16:05 Source Development Discussion
16:30 Poster 1
Poster 1
16:30 - 18:30
Room: Meeting Room 4 & 5
Contributions

16:30 Brilliance Transfer calculations for the Second Target Station - Thomas Huegle (ORNL)

16:30 Verification and validation of Light Shutter System for the European Spallation Source (ESS) - Dennis Marschall

16:30 Recent developments of MCViNE and its applications at SNS - Jiao Lin (Oak Ridge National Lab)

16:30 Investigations of Timing Uncertainties for Fermi Chopper Spectrometers - Garrett Granroth (Oak Ridge National Laboratory)

16:30 Optimising complex neutron optical configurations with a global search in a high dimensional space - Christoph Wildgruber (ORNL)

16:30 Direct Transfer of Monte Carlo Ray tracing Models to Additive Manufacturing Systems - Fahima Islam

16:30 Fast neutron measurements with solid state detectors at pulsed spallation sources - Carlo Cazzaniga (STFC)

16:30 SOFTWARE USER INTERACTION USING TOUCH SCREENS: A DISCUSSION OF BEST PRACTISE - Graham Burgess (UKRI RAL)

16:30 The ISIS TS1 Project: Instrumentation for the measurement of the moderator time structure and neutron flux across the ISIS instrument suite. - Daniel Pooley (STFC RAL)

16:30 Neutron Spin Manipulation Devices Based on High Temperature Superconducting Technology - Stephen Kuhn (Indiana University) Jiazhou Shen (Indiana University)

16:30 ULTRA-LOW TEMPERATURE SAMPLE ENVIRONMENT AT THE ISIS NEUTRON AND MUON SOURCE - Christopher R Lawson (ISIS, STFC, UKRI)

16:30 FAST COOLING FURNACE PROJECT. - Chris Goodway (STFC )

16:30 Solid methane in radiation: Thermodynamic simulation using Arrhenius equations - Christopher R Lawson (ISIS, STFC, UKRI)

16:30 SNS Inner Reflector Plug Design and Fabrication Status - Mark Lyttle (Oak Ridge National Lab)

16:30 Dynamical studies in condensed matters on High Resolution Chopper Spectrometer (HRC) – 2nd phase of HRC project – - Shinichi Itoh (KEK)

16:30 High resolution dynamics and structure measurements enabled by neutron Larmor labeling - Fankang Li (Oak Ridge National Lab)
Tuesday 15 October 2019
08:00 Working Breakfast
Working Breakfast
08:00 - 09:00
Room: Ballroom F
Contributions

08:00 Discuss Posters and Sessions from Monday

08:30 Discussion Planning with session chairs
Registration
Registration
08:00 - 10:30
Room: Lobby
09:00 Tuesday Plenary
Tuesday Plenary
09:00 - 10:15
Room: Ballroom F
Contributions

09:00 ISIS - from TS1 to TS2 to ISIS-II - Robert McGreevy

09:25 Update from the CSNS - Hesheng Chen

09:50 Making ESS a success – A landscape of European accelerator based neutron sources - Thomas Gutberlet (Forschungszentrum Jülich GmbH)
10:15 Coffee
Coffee
10:15 - 10:30
Room: Ballroom F
10:30 Detectors
Detectors
10:30 - 13:00
Room: Meeting Room 3
Contributions

10:30 Multi-Grid Boron-10 detector: from proof-of-principle to applications in time-of-flight spectrometers - Anton Khaplanov (European Spallation Source)

11:00 Towards a High-Throughput High-Resolution Neutron Pinpointing CMOS Camera System for Imaging - Jason Hodges (Oak Ridge National Laboratory)

11:25 Current Status of Scintillation Detector Development at ISIS - G. Jeff Sykora (1Instrumentation division, STFC, ISIS Neutron and Muon Source)

11:50 Recent Improvements in Straw Neutron Detectors for Large Scale Neutron Science Instruments - Jeffrey Lacy (Proportional Technologies, Inc.)

12:15 Combining Simulation and Measurement to Understand Complex Detector Geometries - Andrew Jackson (European Spallation Source)

12:40 Detectors Discussion - Paul Henry (ISIS Neutron & Muon Source)
Experiment Control
Experiment Control
10:30 - 13:00
Room: Meeting Room 7
Contributions

10:30 Data acquisition at SNS and HFIR - Steven Hartman

11:00 Data Acquisition at ESS - Tobias Richter (European Spallation Source ERIC)

11:50 Experiment Control Discussion
Radiation Safety
Radiation Safety
10:30 - 13:00
Room: Meeting Room 8
Contributions

10:30 Developments in Radioactive Waste Management at the ISIS Spallation Neutron Source - Christopher McKay (UK Research and Innovation (ISIS))

10:55 Refined Radiation Safety Analysis and System Classification for the ESS Target Station - Linda Coney (European Spallation Source ERIC)

11:20 Radiation protection at the European Spallation Source - Sigrid Kozielski (ESS ERIC)

11:45 Some Examples of Challenges of Radioactive Waste Characterisation at the ISIS Neutron and Muon Source - Ruth McCrohon (UK Research and Innovation (ISIS))

12:10 Assessment of shutdown dose rates at the ESS target cooling system using SCALE6.2 - Amalia Chambon (DTU Nutech)

12:35 Radiation Safety Discussion
Moderators and Reflectors
Moderators and Reflectors
10:30 - 13:00
Room: Meeting Room 6
Contributions

10:30 Investigation of the impact of crystallite size on the performance of a Be reflector - Douglas Di Julio (European Spallation Source ERIC)

10:55 Solid methane moderators: thermodynamics and chemistry - Oleg Kirichek (The ISIS facility, STFC, UK)

11:20 Development of a High Intensity Moderator for ESS - Valentina Santoro (ESS)

11:45 Engineering design and transient fluid dynamic simulations of the second generation of low dimension cold Moderator for the European Spallation Source ESS - Yannick Bessler

12:10 Observing the state of hydrogen in the JPARC moderator loop - Monika Hartl (European Spallation Source ERIC)

12:35 Target 3 Discussion
13:00 Working Lunch: Cross Breakout Discussions
Working Lunch: Cross Breakout Discussions
13:00 - 14:00
Room: Ballroom F
14:00 Polarization
Polarization
14:00 - 16:30
Room: Meeting Room 3
Contributions

14:00 Wide-angle polarization analysis using 3He spin filters on the LET spectrometer at ISIS - Gøran J. Nilsen (ISIS Neutron and Muon Facility, Rutherford Appleton Laboratory)

14:30 Developing position sensitive polarization analysis method for time-of-flight neutron - Tianhao Wang (China Spallation Neutron Source)

14:55 Design and performance of a superconducting neutron resonance spin flipper - Ryan Dadisman (Oak Ridge National Laboratory)

15:20 Polarization Developments at the Direct Geometry Spectrometer HYSPEC - Barry Winn (ORNL NSCD)

15:45 MR: the polarized neutron reflectometer at China spallation neutron source - Tao Zhu (Institute of Physics, Chinese Academy of Sciences)

16:10 Polarization Discussion - Ken Andersen (ESS)
Diffraction and Imaging Analysis
Diffraction and Imaging Analysis
14:00 - 16:30
Room: Meeting Room 7
Contributions

14:00 Dissolve - Next generation software for the analysis of total scattering data - Tristan Youngs (STFC Rutherford Appleton Laboratory)

14:30 Jupyter Notebooks for Neutron Radiography Data Processing Analysis - Jean Bilheux (ORNL - SNS)

14:55 Advances in event based data structures for neutron scattering experiments - Peter F. Peterson (Neutron Scattering Division, Oak Ridge National Laboratory)

15:35 A Novel Automated Optimized, 3-D Printed Collimator Design for High Pressure Scattering - Fahima Islam

16:00 Diffraction and Imaging Discussion
Operations 1
Operations 1
14:00 - 16:30
Room: Meeting Room 8
Contributions

14:00 ISIS TS1 Project progress summary - Stephen Gallimore (UKRI - STFC)

14:25 Shutdown and commissioning planning for the ISIS TS1 Project - Stephen Gallimore (UKRI - STFC)

14:50 Improving Beam Simulations as well as Machine and Target Protection in the SINQ Beam Line at PSI-HIPA - Davide Reggiani (Paul Scherrer Institut)

15:15 Development of measuring systems for the target of the European spallation source (ESS) - Eberhard Rosenthal (Forschungszentrum Jülich)

15:40 Solving Process Instrumentation Challenges for the ESS Target Safety System - Ola Ingemansson (ESS)

16:05 Systems Design Discussion - David Haynes (ISIS, STFC, UKRI)
Target Engineering #1
Target Engineering #1
14:00 - 16:30
Room: Meeting Room 6
Contributions

14:00 ISIS TS1 Project First Operational Target - Jeremy Moor (Science and Technology Facilities Council)

14:30 The ESS helium cooled rotating target. Design and manufacturing process - Fernando Sordo (Consorcio ESS-Bilbao)

15:00 Preparing for 2 MW Operation of the SNS First Target Station - Bernie Riemer (SNS / ORNL)

15:30 SNS 2MW Target Design - Kevin Johns (Oak Ridge National Lab)

16:00 Target 4 Discussion - Yannick Bessler
17:00 Collaboration Dinner
Collaboration Dinner
17:00 - 19:30
Room: Ballroom H
Wednesday 16 October 2019
08:00 Working Breakfast
Working Breakfast
08:00 - 09:00
Room: Ballroom F
Contributions

08:00 Discuss Sessions from Tuesday

08:30 Discussion planning with session chairs; Poster presenters hang posters
Registration
Registration
08:00 - 10:15
Room: Lobby
09:00 Wednesday Plenary
Wednesday Plenary
09:00 - 10:15
Room: Ballroom F
Contributions

09:00 Current Status and Science in J-PARC MLF - Toshiji Kanaya (J-PARC)

09:25 SINQ update - Uwe Filges

09:50 World-wide activities in CANS - David V. Baxter (Low Energy Neutron Source, Indiana University)
10:15 Photo
Photo
10:15 - 10:30
Room: Ballroom F

10:30 Coffee
Coffee
10:30 - 10:45
Room: Ballroom F
10:45 Novel Instrumentation III
Novel Instrumentation III
10:45 - 13:00
Room: Meeting Room 3
Contributions

10:45 The CANDOR Polychromatic Beam Reflectometer at NIST - Charles Majkrzak (National Institute of Standards)

11:15 Magnetic imaging method using pulsed polarised neutrons - Kosuke Hiroi

11:45 Ferromagnetic Resonance-Polarised Neutron Reflectometry - Gavin Stenning (STFC)

12:10 Neutron Imaging at the High Flux Isotope Reactor and Spallation Neutron Source - Yuxuan Zhang (Oak Ridge National Laboratory)

12:35 Novel Instruments Discussion - Thomas Gutberlet (Forschungszentrum Jülich GmbH)
Data Processing
Data Processing
10:45 - 13:00
Room: Meeting Room 7
Contributions

10:45 Mantid: Building a framework to last - Nicholas Draper (Tessella)

11:15 Scipp: Scientific data handling with labeled multi-dimensional arrays for C++ and Python - Simon Heybrock

11:40 Current status of the applications for a live data reduction method in MLF, J-PARC - Yasuhiro Inamura (Japan Atomic Energy Agency)

12:05 Data Processing
Target Engineering #2
Target Engineering #2
10:45 - 13:00
Room: Meeting Room 6
Contributions

10:45 Two Methods for Measuring Residual Strain in ISIS Target Plates - Dan Wilcox (STFC)

11:10 The final design and manufacturing process for the ESS Monolith Vessel - Fernando Sordo (Consorcio ESS-Bilbao)

11:35 Bubble Generation with a Micro-Orifice in a Liquid Cross-Flow - Charlotte Barbier (ORNL)

12:00 Conceptual Design of the Target Systems for the Second Target Station (STS) - Peter Rosenblad (Oak Ridge National Laboratory)

12:25 Conceptual Design of the Moderator Reflector Assembly for the Second Target Station - James Janney (Oak Ridge National Laboratory)

12:50 Target 5 DIscussion
13:00 Lunch
Lunch
13:00 - 14:00
Room: Ballroom F
Lunch and Poster session
Lunch and Poster session
13:00 - 15:00
Room: Meeting Room 4 & 5
Contributions

13:00 Design and Construction of the European Spallation Source (ESS) components - Activities of Research Centre Jülich - Robert Lohoff (Forschungzentrum Jülich)

13:00 How To Design a Focusing Guide: The Large Moderator Case - Alexandru Stoica (Spallation Neutron Source) Matthew Frost (Oak Ridge National Laboratory)

13:00 ISIS UNIVERSAL CRYOSTAT CONTROLLER – PROJECT CONCEPT - Jamie Nutter (STFC)

13:00 Investigations of the cause of unexpected intensity tail observed in the Fermi chopper spectrometer 4SEASONS - Mitsutaka Nakamura (J-PARC)

13:00 Onion plots for a quick estimate of moderator-instrument interplay - Thomas Huegle (ORNL)

13:00 Moderator development at ISIS - Steven Lilley (ISIS)

13:00 Preliminary design of High Energy Direct Geometry neutron spectrometer at CSNS - Xin Tong (CSNS)

13:00 Examples on using the McStas Union components - Mads Bertelsen (ESS)

13:00 Current Status of AMATERAS - a Cold-Neutron Disk-Chopper Spectrometer - - Kenji Nakajima (J-PARC Center)

13:00 Low background materials for high pressure cells used in inelastic neutron scattering experiments. - Chris Goodway (STFC) Oleg Kirichek (STFC)

13:00 Performance evaluation of the Boron Coated Straws detector with Geant4 - Milán Klausz (HAS, Centre for Energy Research)

13:00 Conceptual design of abnormality sign determination system in general control system of Materials and Life Science Experimental Facility at J-PARC - Kenji Sakai (J-PARC, Japan Atomic Energy Agency)

13:00 Study of the neutron absorbers materials coated on the back side of analyzer silicon crystal wafer - kaoru shibata (J-PARC Center, Japan Atomic Energy Agency)

13:00 Status of LENS for 2019 - David Baxter (Indiana Unviersity)

13:00 Shielding considerations for ESS LoKI - Gábor Náfrádi (ISIS Facility, Rutherford Appleton Laboratory, Chilton, Didcot, Oxfordshire OX11 0QX, United Kingdom)

13:00 A Multi Grid Detector Design for the ESS CSPEC chopper spectrometer - Ramsey Al Jebali (European Spallation Source ERIC)
Thursday 17 October 2019
08:00
08:00 - 09:00
Room: Ballroom F
Contributions

08:00 Discuss Posters and Sessions from Wednesday

08:30 Discussion planning with session chairs; Poster presenters hang posters
Registration
Registration
08:00 - 10:30
Room: Lobby
09:00 Thursday Plenary
Thursday Plenary
09:00 - 10:15
Room: Ballroom F
Contributions

09:00 THE EUROPEAN SPALLATION SOURCE (ESS): CURRENT STATUS AND PLANS - Andreas Schreyer (European Spallation Source)

09:25 Instruments for the Second Target Station at the SNS - Kenneth Herwig (ORNL)

09:50 The common shielding project at ESS - Ken Andersen (ESS)
10:15 Coffee
Coffee
10:15 - 10:30
Room: Ballroom F
10:30 Optics
Optics
10:30 - 13:00
Room: Meeting Room 3
Contributions

10:30 Focusing guides for first and second target beamlines: a conceptual design perspective - Alexandru Stoica (Spallation Neutron Source)

11:00 Engineering and Prototyping of ESS Neutron Beam Extraction System - Daniel Lyngh

11:25 Neutron beam extraction from small moderators: secondary source approach - Thomas Huegle (ORNL)

11:50 Two dimensional focusing of neutron beam under extreme conditions with Adaptive focusing optics - Masako Yamada (Paul Scherrer Institute)

12:15 Tailoring the phase space volume for instruments at accelerator based neutron sources - Paul Zakalek (Forschungszentrum Jülich GmbH)

12:40 Optics Discussion - Uwe Filges
Monte Carlo Methods
Monte Carlo Methods
10:30 - 13:00
Room: Meeting Room 7
Contributions

10:30 New developments in the McStas neutron Monte Carlo ray-tracing package - Mads Bertelsen (European Spallation Source, Data Management and Software Center)

11:00 Detector rate estimate for the BIFROST instrument at ESS - Milán Klausz (HAS, Centre for Energy Research)

11:25 Non-static surfaces in MCNPX: the Chopper Extension - Kyle Grammer (ORNL)

11:50 Detailed Supermirror physics in MCNP6 - Miguel Magán Romero (ESS-Bilbao)

12:15 Application of ADVANTG Variance Reduction Parameters for MCNP6 at ESS - Thomas Miller (European Spallation Source)

12:40 Monte Carlo Discussion
Target Engineering #3
Target Engineering #3
10:30 - 13:00
Room: Meeting Room 6
Contributions

10:30 Towards the engineering design of the next-generation spallation neutron source at LANSCE - Lukas Zavorka (LANL)

10:55 Design and construction of a nitrogen-cooled Pb-based neutron spallation target for the neutron Time-Of-Flight facility at CERN - Raffaele Esposito (CERN / EPFL)

11:20 Target Segment Design Analysis for the STS Conceptual Design - Thomas McManamy (ORNL)

11:45 Beam Dump Facility (BDF) production target at CERN – technological challenges, beam irradiation and R&D activities - Marco Calviani (CERN)

12:10 The ESS Tuning Beam Dump - Fernando Sordo (Consorcio ESS-Bilbao)

12:35 Target 6 Discussion - Yoann Charles (Paul Scherrer Institut)
13:00 IAC Meeting
IAC Meeting
13:00 - 14:00
Room: Meeting Room 1

Working Lunch: Cross Breakout Discussions
Working Lunch: Cross Breakout Discussions
13:00 - 14:00
Room: Ballroom F
14:00 Accelerator Progress
Accelerator Progress
14:00 - 16:30
Room: Meeting Room 8
Contributions

14:00 ESS Accelerator update and experience from ESS ion source and LEBT beam commissioning - Ryoichi Miyamoto

14:30 Conventional ring designs for ISIS II - Dean Adams (STFC/RAL)

14:55 RF-driven H- Ion Sources for High Power Accelerators: Status and Challenges - Baoxi Han (Oak Ridge National Laboratory)

15:20 The Legnaro fast-neutron facility NePIR - Pierfrancesco Mastinu (Istituto Nazionale di fisica Nucleare)

15:45 $^{100}$Mo/$^{99m}$Tc and $^{64}$Cu medical radioisotopes production using 14 MeV fusion neutrons - Antonino Pietropaolo (ENEA Department of Fusion and Technologies for Nuclear Safety and Security)

16:10 Accelerator Discussion - Sarah Cousineau (Research Accelerator Division, Oak Ridge National Laboratory)
Sample Environment
Sample Environment
14:00 - 16:30
Room: Meeting Room 3
Contributions

14:00 High Field Magnets for Neutron Scattering - Mark Bird (National High Magnetic Field Laboratory)

14:30 High pressure neutron scattering in a diamond anvil cell - Bianca Haberl (Oak Ridge National Laboratory)

15:00 Sample Environment for Soft Matter at ISIS - Andy Church (STFC)

15:20 Microscopic samples and high precision: challenges and solutions at the ESS - malcolm guthrie (European Spallation Source, ERIC)

15:40 Sample environment at the CSNS - Haitao Hu (Institute of High Energy Physics, CAS)

16:00 Sample Environment Discussion - Christof Niedermayer (Laboratory for Neutron Scattering and Imaging, Paul Scherrer Institut)
Spectroscopy Analysis
Spectroscopy Analysis
14:00 - 16:30
Room: Meeting Room 7
Contributions

14:00 Extract microscopic information of materials from Neutron Scattering data using a Machine Learning assisted approach. - Anjana Samarakoon

14:30 The LSWT engine SpinW and modeling ToF data - Simon Ward (ESS - DMSC)

14:55 ICE-MAN and VirtuES, the Integrated Computational Environment-Modeling & Analysis for Neutrons at ORNL - Timmy Ramirez-Cuesta (CEMD ORNL)

15:20 Super-resolution Inversion in Neutron Direct Geometry Time-of-flight Spectroscopy - Jiao Lin (Oak Ridge National Lab)

15:45 User-friendly software for modeling collective spin wave excitations - Steven Hahn (Neutron Scattering Division, Oak Ridge National Laboratory)

16:10 Spectroscopy analysis software
Neutronics #2
Neutronics #2
14:00 - 16:30
Room: Meeting Room 6
Contributions

14:00 Flight Path Shielding Study with the Next-Generation Lujan Target-Moderator-Reflector-Shield Assembly - Michael Mocko (Los Alamos National Laboratory)

14:30 Moderator Performance at SNS Next Generation IRP (IRP3) - Wei Lu (Oak Ridge National Laboratory)

15:00 Neutronics Analyses for the Conceptual Design of the SNS Second Target Station - Igor Remec (Oak Ridge National Laboratory)

15:30 Shielding development for VENUS instrument - Franz Gallmeier (ORNL)

16:00 Target 7 DIscussion - Fernando Sordo (Consorcio ESS-Bilbao)
16:30
16:30 - 18:30
Room: Meeting Room 4 & 5
Contributions

16:30 Manufacturing Process Improvements of Bubblers for Helium Gas-Injection in SNS Pulsed Mercury Neutron Source Target - Isaac Waldschlager (Oak Ridge National Laboratory )

16:30 CHESS: A look into the next generation of neutron instruments - Gabriele Sala (Neutron Scattering, Spectroscopy Division)

16:30 The Time-of-Flight Small Angle Neutron Scattering Instrument at CSNS - Yubin Ke (Spallation Neutron Source Science Center,Institute of High Energy Physics, Chinese Academy of Sciences)

16:30 Radiation chemistry of solid methane moderators - Gemma L Draper (ISIS, STFC, UKRI)

16:30 Electron Beam Welding SNS Targets - Nick Summerlot

16:30 Simulating neutron transport in long neutron beamlines at a spallation neutron source using Geant4 - Douglas Di Julio (European Spallation Source ERIC)

16:30 The ISIS Data Acquisition Electronics Development - David Templeman

16:30 Status and upgrade plan of Linac and RCS in J-PARC - Junichiro Kamiya (Japan Atomic Energy Agency/J-PARC)

16:30 Suite of the Neutron Spectrometers in J-PARC MLF - Ryoichi Kajimoto (J-PARC)

16:30 Status of the Time-of-Flight Direct-Geometry Spectrometer 4SEASONS - Ryoichi Kajimoto (J-PARC)

16:30 ISIS TS1 Project - Reflector Engineering Development - Dan Coates

16:30 Cryogenic Sample Environment & Helium Recovery at ISIS - Richard Down (STFC)

16:30 ISIS TS1 Project – Removal of the Target, Reflector and Moderator (TRaM) Support Structure using a Bandsaw within a Remote Handling Cell - Ross Turnley (STFC)

16:30 Measurement and Simulation of Decay Heat in the ISIS TS1 Target - Dan Wilcox (STFC)

16:30 MENUS - MATERIALS ENGINEERING BY NEUTRON SCATTERING - Ke An (Oak Ridge National Laboratory)

16:30 The Beam Monitor Common Project for the Instruments of the European Spallation Source ERIC - Vendula Maulerova (European Spallation Source ERIC & Lund University)
Friday 18 October 2019
08:00 Working Breakfast
Working Breakfast
08:00 - 09:00
Room: Ballroom F
Contributions

08:30 Discuss Posters and Sessions from Thursday
09:00 Friday Plenary 1
Friday Plenary 1
09:00 - 10:45
Room: Ballroom F
Contributions

09:00 Breakout Summaries - David Haynes (ISIS, STFC, UKRI) Georg Ehlers (Oak Ridge National Laboratory) Günter Muhrer (European Spallation Source ERIC) Jonathan Taylor (European Spallation Source ERIC) Ken Andersen (ESS)

10:20 Report from the first ARIES workshop on efficient neutron sources - Yoann Charles (Paul Scherrer Institut)
10:45 Coffee
Coffee
10:45 - 11:00
Room: Ballroom F
11:00 Friday Plenary 2
Friday Plenary 2
11:00 - 12:30
Room: Ballroom F
Contributions

11:00 Proton Power Upgrade Project Update - J. Galambos (Oak Ridge National Laboratory)

11:25 Closing Remarks - Kenneth Herwig (ORNL) Robert McGreevy
12:30 Box Lunch and Discussions of offline collaboration
Box Lunch and Discussions of offline collaboration
12:30 - 13:00
Room: Ballroom F

13:00 SNS Facility Tour
SNS Facility Tour
13:00 - 18:00
Room: Ballroom F

Choose timezone