October 30, 2016 to November 4, 2016
US/Eastern timezone

Presentations and Posters

Session 1

IWSMT-13 Welcome Address - Bernie Riemer

https://conference.sns.gov/event/20/picture/22.pdf

 

Spallation Materials Technology - Louis Mansur

https://conference.sns.gov/event/20/picture/23.pdf

 

Impact of H and He Transmutation Products on Radiation Effects in Materials - Steven Zinkle

https://conference.sns.gov/event/20/picture/24.pdf

 

Status of the European Spallation Source - Eric Pitcher

https://conference.sns.gov/event/20/picture/25.pdf

 

Present status of Chinese Spallation Neutron Source project - Jia Xuejun

https://conference.sns.gov/event/20/picture/26.pdf

 

SNS Status Update and the Proton Power Upgrade Project and its Impact on the SNS First Target Station

https://conference.sns.gov/event/20/picture/27.pdf

 

 

Session 2

SINQ - A status Report - MIchael Wohlmuther

https://conference.sns.gov/event/20/picture/28.pdf

 

Present Status of JSNS Mercury Target - Takashi Naoe

https://conference.sns.gov/event/20/picture/29.pdf

 

Spallation Materials R&D and Application for Beam Intercepting Devices (BID) at CERN and the HiRadMat Facility - Francois-Xavier Nuiry

https://conference.sns.gov/event/20/picture/30.pdf

 

Investigation of Target Material for Muon Production Under High Power Proton Beam Irradiation - Shunsuke Makimura

https://conference.sns.gov/event/20/picture/31.pdf

 

Pulsed Heavy Ion Irradiaton of Tungsten - Jemila Habainy

https://conference.sns.gov/event/20/picture/32.pdf

 

Re-examination of ion irradiation as a credible tool to simulate high energy neutron and proton-induced void swelling for accelerator-driven devices  - Frank Garner

https://conference.sns.gov/event/20/picture/33.pdf

 

The RaDIATE Collaboration - Goals, Status, and Future Plans - Patrick Hurh

https://conference.sns.gov/event/20/picture/34.pdf

 

 

Session 3

STIPV Irradiation Tensile Tests - Tarik Saleh

https://conference.sns.gov/event/20/picture/35.pdf

 

Tensile properties characterization of irradiated AISI 316L from high-use target modules at the Spallation Neutron Source using digital image correlation - David McClintock

https://conference.sns.gov/event/20/picture/36.pdf

 

Swelling, creep and embrittlement of D9 stainless steel cladding and duct irradiated in two FFTF driver fuel assemblies to high neutron exposures - Frank Garner

https://conference.sns.gov/event/20/picture/37.pdf

 

The behaviour of AlMg3 after irradiation at high proton and neutron fluencies - Yong Dai

https://conference.sns.gov/event/20/picture/38.pdf

 

PIE of the MEGAPIE Samples at JAEA - Shigeru Saito

https://conference.sns.gov/event/20/picture/39.pdf

 

The transmission electron analysis (TEM) of dislocation loops in T91 steels from MEGAPIE and TWIN-ASTIR irradiation programs - Milan Konstantinovic

https://conference.sns.gov/event/20/picture/40.pdf

 

 

Session 4

Mechanical Properties and Fracture Behavior of Pure Tungsten and Tanatlum after Irradiation in SINQ - Yong Dai

https://conference.sns.gov/event/20/picture/41.pdf

 

Annealing Effect on Microstructure and Hardness of Irradiated Tungsten - Barbara Horvath

https://conference.sns.gov/event/20/picture/42.pdf

 

Formation of Oxide Layers on Tungsten in Mildly Oxidizing Gas - Jemila Habainy

https://conference.sns.gov/event/20/picture/43.pdf

 

Low-Z Material R&D Application for Beam Intercepting Devices (BID) at CERN - Francois-Xavier Nuiry

https://conference.sns.gov/event/20/picture/44.pdf

 

Fatigue Properties of Tungsten from Different Processing Routes - Jemila Habainy

https://conference.sns.gov/event/20/picture/45.pdf

 

Luminescent Materials Development for Beam-on-Target Imaging at the European Spallation Source - Thomas Shea

https://conference.sns.gov/event/20/picture/46.pdf

 

Design and fabrication of a passive irradiation module utilizing the high neutron flux from the 5 MW Spallation Source at ESS - Yongjoong Lee

https://conference.sns.gov/event/20/picture/47.pdf

 

 

Session 5

The ESS Helium Cooled Rotating Target - Fernando Sordo

https://conference.sns.gov/event/20/picture/48.pdf

 

Design Modification of ISIS TS2 Target in order to Improve Longevity amid Spallation Reactions - Arghya Dey

https://conference.sns.gov/event/20/picture/49.pdf

 

Simulating Performance of Tantalum Clad Tungsten Targets - Dan Wilcox

https://conference.sns.gov/event/20/picture/50.pdf

 

ESS Moderator and Reflector Plug Design, Machining, Welding, and Testing - Yannick Bessler

https://conference.sns.gov/event/20/picture/51.pdf

 

Optimization of Condition for Invar Stainless HIP Diffusion Bonding - Takashi Wakui

https://conference.sns.gov/event/20/picture/52.pdf

 

Measured SNS Mercury Target Vessel Strain Responses to Beam Pulses and Comparison to Simulations with Variations on Mercury Material Model Behavior - Drew Winder

https://conference.sns.gov/event/20/picture/53.pdf

 

Failure analysis on the welded part with with steep change of thickness employed in JSNS mercury target vessel - Takashi Wakui

https://conference.sns.gov/event/20/picture/54.pdf

 

 

Session 6

Cavitation Damage in Double-walled Mercury Target Vessel - Takashi Naoe

https://conference.sns.gov/event/20/picture/55.pdf

 

Simulation of Hydrogen Thermal Desorption Characteristics in Metals Containing Large Voids - Hayato Yamashita

https://conference.sns.gov/event/20/picture/56.pdf

 

Numerical Modeling of Impurities Mass Transfer in a Wire Wrapped Fuel Assembly Under Flowing Lead Bismuth Eutectic - Alessandro Marino

https://conference.sns.gov/event/20/picture/57.pdf

 

Development of SIMP Steel for Accelerator Driven System in China - Zhiguang Wang

https://conference.sns.gov/event/20/picture/58.pdf

 

Development of the CSNS Target Plug - Shaohong Wei

https://conference.sns.gov/event/20/picture/59.pdf

 

 

Session 7

Positron Lifetime Calculation of Vacancy Clusters in Ta Containing H and He - Qiu Xu

https://conference.sns.gov/event/20/picture/60.pdf

 

Investigation of Samples of FM and ODS Steels Irradiated in the Spallation Source SINQ by Positron Annihilation - Vladimir Krsjak

https://conference.sns.gov/event/20/picture/61.pdf

 

Rate Theory Analysis of Growth Process of Helium Bubbles in F82H Irradiated in SINQ - Koichi Sato

https://conference.sns.gov/event/20/picture/62.pdf

 

Investigation of SINQ Irradiated Samples by Single Detector Doppler Broadening Spectroscopy - Jozef Snopek

https://conference.sns.gov/event/20/picture/63.pdf

 

Experimental Investigation of Irradiation Effects in Beryllium Beam Window after Exposure in the NuMI Beamline: Preliminary Results and Plans - Slava Kuksenko

https://conference.sns.gov/event/20/picture/64.pdf

 

Plans for the RaDIATE High Energy Proton Materials Irradiation at BLIP - Kavin Ammigan

https://conference.sns.gov/event/20/picture/65.pdf

 

 

Session 8

Application of Rigorous Two Step Method to Proton Activation of ISIS Targets - Steven Lilley

https://conference.sns.gov/event/20/picture/66.pdf

 

Displacement Damage, Helium and Hydrogen Production in Different Materials Irradiated in STIP VI - Yong Dai

https://conference.sns.gov/event/20/picture/67.pdf

 

Material Selection of the Beam Profile Monitoring Devices at ESS Target Station - Yongjoong Lee

https://conference.sns.gov/event/20/picture/68.pdf

 

Finale IWSMT-13 - Bernie Riemer

https://conference.sns.gov/event/20/picture/69.pdf

 

 

Posters

Neutronics Analyses for the ORNL’s Spallation Neutron Source Second Target Station

https://conference.sns.gov/event/20/picture/70.pdf

 

Hardness of a carburized surface layer on AISI 316L stainless steel from high-use Spallation Neutron Source target vessels after irradiation

https://conference.sns.gov/event/20/picture/71.pdf

 

Microstructure and mechanical properties of prototypic electron beam welds used to fabricate AISI 316L target vessels for the Spallation Neutron Source

https://conference.sns.gov/event/20/picture/72.pdf